Free ghost flame template

Not sure what I am talking about? Just watch the video and it will all make sense. Using the grit sandpaper lightly sand the design. Be careful not to sand past the outer tape edge.

In the video, we are fading the effect by sanding harder on the tips and lighter on the edges. The middle of the outline was very slightly sanded. However, you can sand the entire design evenly if you wish. This will give your entire design a matte look rather than the faded look we did in the video.

It can be removed. All you have to do is sand the edges of the design with the grit and buff the area with compound and polish and it's gone. You can print anything you want on their adhesive paper. Then you cut it out and place on desired location of car.

This even eliminates the need for masking. It is called the Custom Image Kit. This is actually pretty simple as well. Use a piece of masking paper or even gift wrap paper what we used in the video. Place it over the design before you unmask and use the side of a lead pencil to outline the design for you. You can then cut the design out and use it for a template for the other side.

No, It only sands a small portion of the clear. Make sure you coat it well so you have a solid flame shape. After that, you can layer a lighter color to the flame. Keep the stencil on so you'll have a clean finish. When spraying the second color, you don't want to make it too opaque.

You want the base color still see-through. And you don't want to spray it all over the whole flame. You may want to start from the end and stop by the third quarter part towards the start. Blend the spray carefully creating a beautiful gradient to mimic an actual flame.

How do you paint a blue flame? To get a clean finish, use a flame template stencil. Place down the stencil carefully and neatly to prevent leaking.

For the best result of painting a blue flame, you need to go with a solid white first as the base. Then gradually add with gray paint. After that, lightly add blue to the flame. You need to make sure that the blue paint is thin enough and not as opaque but still read as blue.

On the base of the flame, you will need to use black. After you have the basic shape and gradient, add more solid white to highlight the flame. Letter Number Template. Feb 02, By Printablee. No Comment.