Select the flash drive from the left column, and click erase. Adjust to the following settings:. It can take up to 60 minutes maybe more to copy the installer files into the USB drive. You should now be able to install macOS High Sierra to your drive. The process will take some time to complete, depending on the type of processor you have.
This may take a while, so be patient. You will need a separate flash drive for this step. For this step, you will need the macOS flash installer you created earlier. You should now be able to dual-boot using the Clover Menu. Access to macOS After formatting the drive, the next step is to create a macOS flash drive installer. Creating the Flash Drive Installer Osx Bootable Usb Windows Once you have access to the macOS operating system, you can create the flash drive installer and start the installation process.
Create the Installer Open Terminal and paste the following code: Press enter. Type in your password. Press Y when asked to erase. Press enter again. Your system should restart after the installation process is completed. Set your Time Zone based on your location. Does anyone have experiences with this combination?
How will get it working fine with the latest I guess with the hardware it should be all good. But how should my Setup be? I only found a Dual boot with Lion here in the threads. Thank You for your Help. Windows will be on the same hard disk as OS X? Or on a separate hard disk? I have this setup. There are several guides out there. Basically you install mountain lion like normal.
After ml was setup and running properly I shrank the mountain lion partition and created a separate partition with disk utility.
Formatted it for Windows, installed Windows 7 like normal on that partition. You then have to boot from your unibeast usb and rerun multibeast in ml and only install the bootloader. I want to install ml on 1 TB disk and win 7 on a seperate gb hdd. So first ml and then win7? I know we are a Windows 7 topic specific blog, but lately there are an increasing interest in people who want to have their PC to run both Windows 7 and Mac OS X simultaneously. So let me share some of my 2-year of experience of building and installing hackintosh warning: if you are not computer savvy user you may not want to try this :.
Note: before we start, it is important to backup all your data if necessary, any data lost is your own responsibility. Lets assume you already have Windows 7 installed. The first thing you probably want to do is to create a new partition on your hard drive.
When you create a new partition please give it at least 20 GB or more, if you want to use the hackintosh for any real usage you probably want to add more disk spaces in there. Yes, you literary need to try out on the different distributions, if you really want to proceed and have a working hackintosh you better start looking at the hardware supportability here.
Since every one of you will have a different hardware configuration, it is hard to be general in this case. The bottom line is, you want to check your motherboard for desktop or laptop version first. Yours might be different, again its all depend on the hardware. During the initial Disk load press F8 for optional parameter. Now its the matter of re-trying over and over again. Remember what your configuration is and apply the proper driver kext file. We will skip the long and boring re-trying part.
You will soon find out you are not able to boot back into Windows 7 again. T 2 MB L2 cache, 1. Im quite new to Mac. I have a slightly different hardware configuration. But it should does the job. All the other hardware should work.
Suggest you use iATKOS v7 the higher the better, as you will run into lots of problem later when you try to update to the latest But other than that, make sure you check all the corresponding customization list that are suit for your hardware.
At least my hackintosh needs to boot with one CPU at the time. Other wise cause race condition and lead to kernel panic. Do you think this will work for me?
I think it should and thank you for this tutorial, this is the only one i have seen with a AMD Athlon processor. Hello I have lenovo s10e netbook please tell me if I can get iatkos v7 on my netbook that has windows 7 I would like to dual boot it.
But I have heard that wired Ethernet does not work. Can you please sent me all the kext for my mac osx so I can get everything working. My e mail address is [email protected]. Any help will be highly appreciated. Hi, Please try this. At the customize section click on drivers select system and click on wired and wireless click done when installing your iATKOS v 7. Hello everyone, Im Mike, new to this forum.
Im on here for only one reason, and im nbot sure weither to post it here or to a mac site well… I followed the instrustions to this site to the tee.. Now I have the usb stick all set up perfectly and i know it works because it begins to boot.
0コメント